Raymarine forum / Raymarine Forums / Product Selection Assistance v / Autohelm ST50 Depth Gauge Replacement

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Autohelm ST50 Depth Gauge Replacement
06-13-16, 12:18 PM
Post: #1
Timdb Offline
Junior Member
**
 		Posts: 2
Joined: Jun 2016
Reputation: 0
Autohelm ST50 Depth Gauge Replacement
I need confirmation that my model 2096 0340067 Autohelm depth gauge can be replaced with a Raymarine i50 depth gauge without changing out the Autohelm transducer.
Find all posts by this user
Quote this message in a reply
06-13-16, 03:04 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Autohelm ST50 Depth Gauge Replacement
Welcome to the Raymarine Forum Tim,

Instrument depth,transducers which have been designed for use with ST50 Depth Instrument displays are indeed compatible with any of the following:
- i50 Depth
- i50 Tridata
- iTC-5 Analog Instrument Converter
Find all posts by this user
Quote this message in a reply
06-14-16, 10:02 AM (This post was last modified: 06-14-16 01:47 PM by Chuck - Raymarine - Moderator.)
Post: #3
Timdb Offline
Junior Member
**
 		Posts: 2
Joined: Jun 2016
Reputation: 0
RE: Autohelm ST50 Depth Gauge Replacement
Thanks Chuck.
Find all posts by this user
Quote this message in a reply
06-14-16, 01:47 PM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Autohelm ST50 Depth Gauge Replacement
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication