Raymarine forum / Raymarine Forums / AIS v / [CA] [CA11] AIS on an Element 7

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] AIS on an Element 7
11-16-19, 12:12 PM
Post: #11
[email protected] Offline
Junior Member
**
 		Posts: 6
Joined: Sep 2019
Reputation: 0
RE: [CA11] AIS on an Element 7
After contacting Quark-elec using your comments they helpfully sent me a modified version of the firmware for the A032-ais bridge/converter that filters out the VDO sentences (I think), once installed my own boat is no longer displayed as a target on the Element 7S plotter.
Thanks again for all your patient help in solving this issue,
Regards
Chris
Find all posts by this user
Quote this message in a reply
11-16-19, 02:23 PM
Post: #12
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] AIS on an Element 7
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication