[CA] [CA11] Raymarine Cartography Adaptor

[lawlerl]

We purchased a Sealine which has a Raymarine C80, as we could not get charts for it and were advised to purchase Navionics charts and a Raymarine Chartography Adaptor - which we did - a note with the adaptor says a software upgrade may be required - you will need to upgrade your product to the latest software before use - can you confirm if it is the software on the C80 or the software on the adaptor that needs to be upgraded?

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum lawlerl,

As indicated within the Software History table of the C-Series Classic MFD software update web page, support for the Raymarine Cartography Adapter (uSD / CF adaptor) was introduced with the v5.04 software update. Accordingly, should the MFD currently be operating with earlier software, then it would be necessary to update the MFD's software with C-Series Classic MFD v5.16 software (the final software update).

[lawlerl]

Many thanks Chuck,

We'll check the software and update if needed.

[Chuck - Raymarine - Moderator]

You're welcome.