Raymarine forum / Raymarine Forums / Product Selection Assistance v / Axiom pro rvx with b265lh ducer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom pro rvx with b265lh ducer
03-04-20, 09:29 PM
Post: #1
Offshore Offline
Junior Member
**
 		Posts: 10
Joined: May 2017
Reputation: 0
Axiom pro rvx with b265lh ducer
Will my B265lh connect directly to a new Axiom pro 16 or do I need the cp470?

Thank you
Find all posts by this user
Quote this message in a reply
03-05-20, 11:17 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom pro rvx with b265lh ducer
Welcome to the Raymarine Forum Offshore,

Q. Will my B265lh connect directly to a new Axiom pro 16 or do I need the cp470?
A. The A80010 B165LH transducer may be directly interfaced to an Axiom Pro 16 RVX MFD. However, should you own an Axiom Pro 16 S MFD, then the MFD will need to be interfaced to a CP470 or CP570, which in turn will be interfaced to the A80010 B165LH transducer.
Find all posts by this user
Quote this message in a reply
03-05-20, 03:04 PM (This post was last modified: 03-05-20 03:11 PM by Chuck - Raymarine - Moderator.)
Post: #3
Offshore Offline
Junior Member
**
 		Posts: 10
Joined: May 2017
Reputation: 0
RE: Axiom pro rvx with b265lh ducer
Thank you for the quick response. to be clear A80010 is the B265LH through hull, Correct?
Find all posts by this user
Quote this message in a reply
03-05-20, 03:12 PM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Axiom pro rvx with b265lh ducer
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication