Raymarine forum / Raymarine Forums / Product Selection Assistance v / [CA] [CA11] 12v test for Z029

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] 12v test for Z029
03-30-20, 05:26 PM (This post was last modified: 03-31-20 01:45 PM by Chuck - Raymarine - Moderator.)
Post: #1
Elaia326 Offline
Junior Member
**
 		Posts: 2
Joined: Feb 2016
Reputation: 0
[CA11] 12v test for Z029
Simple wiring test for testing actuator
Which wire to correctly test unit on workbench
Find all posts by this user
Quote this message in a reply
03-31-20, 01:51 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] 12v test for Z029
Welcome to the Raymarine Forum Elaia326,

Please click here to view a FAQ addressing how to test a drive unit. The heavy gauge leads are the drive's motor leads. The light gauge leads are the drive's clutch leads. They positive clutch lead is red and the negative clutch lead is blue.
Find all posts by this user
Quote this message in a reply
04-01-20, 10:52 AM (This post was last modified: 04-01-20 12:09 PM by Chuck - Raymarine - Moderator.)
Post: #3
Elaia326 Offline
Junior Member
**
 		Posts: 2
Joined: Feb 2016
Reputation: 0
RE: [CA11] 12v test for Z029
Chuck
Unit is off boat
Test clutch ... add 12v to clutch leads (thin) listen for clutch action
Test ram .. add momentary 12v to fat leads .. in each direction for opposite movement ? Correct ?
Find all posts by this user
Quote this message in a reply
04-01-20, 12:10 PM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] 12v test for Z029
Elaia326,

The synopsis which you have responded with is correct.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication