Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axion 9 install

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axion 9 install
04-20-20, 06:34 PM (This post was last modified: 04-21-20 04:00 PM by Chuck - Raymarine - Moderator.)
Post: #1
hnewstreet Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2018
Reputation: 0
[CA11] Axion 9 install
I am attempting to install the Axion 9 using the metal trunnion bracket, however, when I connect the RV-100 cable, the display cannot be tilted up because the cable hits the bracket. Is there any other metal trunnion brackets available for this unit that have greater clearance from the bottom of the unit to the bracket (i.e taller brackets)? If not, is there any right- angle adapters?
Find all posts by this user
Quote this message in a reply
04-22-20, 09:50 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axion 9 install
Welcome to the Raymarine Forum

Unfortunately, Raymarine does not offer a trunion mount for the Axiom 9 MFDs providing greater height. However, Raymarine offers the A80515 Right Angle RV Transducer Adapter Cable.

Please click here to view a FAQ how one may purchase / order parts for their Raymarine products.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication