Raymarine forum / Raymarine Forums / Multifunction Displays v / [DG] [DG11] C70 MFD

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] C70 MFD
04-27-20, 07:57 AM (This post was last modified: 04-27-20 01:23 PM by Chuck - Raymarine - Moderator.)
Post: #1
Huxs Offline
Junior Member
**
 		Posts: 1
Joined: Apr 2020
Reputation: 0
Smile [DG11] C70 MFD
can anyone please explain the difference between system and local view after pressing presentation soft key on the C70 Plotter many thanks Chris
Find all posts by this user
Quote this message in a reply
04-28-20, 08:48 AM
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG11] C70 MFD
Hi Chris,
Thank you for your enquiry,

There are some features that are system wide - such as lighting levels, variation and units and these can be restricted to the unit only (local) or shared with the system, things like chart view will be isolated to each window set selected (local) or applied across the windows (System), motion mode can be set to a specific window(local) or shared across the windows(System), etc . . . . This feature is covered in various chapters of the handbook.

Thanks
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication