Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CC11] ST8002 Cable Sheared
05-04-20, 10:57 AM (This post was last modified: 05-04-20 02:23 PM by Chris - Raymarine - Moderator.)
Post: #1
[CC11] ST8002 Cable Sheared
My autopilot has been working intermittently last season. It is now not working at all. It powers on and captures a heading in standby but if I touch "auto" it cannot not and will not assume control and I can still steer the boat even though the display reads "auto". Also turning the knob does nothing. I did some trouble shooting and went behind the head unit to find a cable which appears cut/corroded. I've attached pics....
Find all posts by this user
Quote this message in a reply
05-11-20, 02:33 PM
Post: #2
RE: [CC11] ST8002 Cable Sheared
Hello Brewster16 and welcome to the Raymarine forum,

The cable you are indicating is sheared is a NMEA0183 cable and would only bring waypoint data to the Autopilot. It is not needed for the basic operation of the display. From what you are discribing the ST8002 is failed. We would recommend getting it tested or swapped. Please see our dealer finder fir a lost of dealers in your area,
https://www.raymarine.com/buy/find-a-dealer.html
Find all posts by this user
Quote this message in a reply
05-15-20, 05:14 AM
Post: #3
RE: [CC11] ST8002 Cable Sheared
Thanks for your response. As an NMEA0183 cable (sheared) could that have been associated with a DSM 300 depth sounder?
Find all posts by this user
Quote this message in a reply
05-18-20, 08:43 AM
Post: #4
RE: [CC11] ST8002 Cable Sheared
Your welcome, the cable would have nothing to do with a DSM300.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)