Raymarine forum / Raymarine Forums / Multifunction Displays v / Connecting Radar to two displays

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connecting Radar to two displays
02-29-16, 07:57 PM (This post was last modified: 03-01-16 08:42 AM by Chuck - Raymarine - Moderator.)
Post: #1
[email protected] Offline
Junior Member
**
 		Posts: 1
Joined: Feb 2016
Reputation: 0
Connecting Radar to two displays
I am trying to connect two multifunctional displays, a65 and a67, to a radar scanner, RD418D. I want to see and control the radar from both displays. All the devices are connected via SeaTalkng. I setup the equipment and both displays came up as a data master and I could not deselect the a65.
What is the correct method?
Tim Bowie
Find all posts by this user
Quote this message in a reply
03-01-16, 09:22 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Connecting Radar to two displays
Welcome to the Raymarine Forum Tim,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication