Raymarine forum / Raymarine Forums / Fishfinders v / Using a CP370/CP300/DSM30/DSM300/DSM250 xducer with a/c/e/eS-Series MFD

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Using a CP370/CP300/DSM30/DSM300/DSM250 xducer with a/c/e/eS-Series MFD
07-07-16, 02:22 PM (This post was last modified: 01-11-17 01:38 PM by Chuck - Raymarine - Moderator.)
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
Using a CP370/CP300/DSM30/DSM300/DSM250 xducer with a/c/e/eS-Series MFD
Using a CP370/CP300/DSM30/DSM300/DSM250 xducer with a/c/e/eS-Series MFD

Transducers designed for use with a CP370/CP300/DSM30/DSM300/DSM250 Sounder module or hsb/hsb2/SL Pathfinder Series Fishfinder may be adapted for use with an ax7, cx7, e7D, ex7, or eSx7 MFD by installing an E66066 Transducer Adapter onto the transducer cable's plug.

RAYFAQ#
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication