ELCTRONICS UPGRADE

[BOBTRULL]

ELCTRONICS UPGRADE
BELOW I HAVE LISTED ALL THE ITEMS I HAVE RECENTLLY PURCHASED TO UPGRADE MY BOAT CAN ANYONE PROVIDE SCYMATIC TO EASE IN HOOKING ALL THIS UP TOGETHER AND DO THEY ALL GET POWER FROM NETWORK CABLE RAYNET AND/OR SEATALK NG

THANKS

BOBTRULL


RAYNET E92142 RADAR 18" RD418HD
RAYNET T70229 CP100 DOWN SCAN
RAYNET "" CP200 SIDE SCAN
E62351 RCU-3 REMOTE
E70126 GS165 MONITOR
RAYNET E70297 CP370 SOUNDER
NG E32153 RAYSTAR 130
RAYNET T70195 SR150 SIRUS/XM
NG E70087 RAY260 VHF RADIO
NG MSAV750 FUSION RADIO DVD
RAYNET A80007 HS5 NETWORK SWITCH (2)
NG T70156 EV200 EVOLUTION AUTO PILOT
NG E32158 AIS 650
SEATALK E15024 S100 AUTO PILOT REMOTE

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Bob,

Unfortunately, we don't have the bandwidth to create custom product integration diagram. These products would be interfaced as follows:

Ethernet Communications: The Gigabit socket of each HS5 RayNet Network Switch will be interfaced to an Ethernet Network socket of the gS165 via an appropriate length of RayNet (F) to RayNet (F) Cable. The Ethernet Network socket of the CP100, CP200, CP370, SR150, and RMK-9 (not specified) will each be interfaced to either of the HS5 RayNet Network Switches via an appropriate length of RayNet (F) to RayNet (F) Cable. The power cables supplied with the gS165, CP100, CP200, CP370, SR150, and RMK-9 will each be interfaced to switched 12 or 24 VDC power circuits. The Digital Radar Cable will be connected to the radome, to one of the HS5 RayNet Network Switches, and to a switched 12 or 24 VDC power circuit. The Fusion MSAV750 will be interfaced either of the HS5 RayNet Network Switches via an appropriate length of RayNet (F) to RJ45 (M) Cable. Available cable lengths and the associated part numbers for these Ethernet Networking Cables may be found here.

SeaTalkng Communications: The gS165, Ray260, Raystar 130 GPS Sensor, AIS650, p70R Autopilot Control Head, EV-1 Sensor Core, and ACU-200 will each be interfaced as an individual spur to a powered and properly terminated SeaTalkng backbone. An E22158 SeaTalk to SeaTalkng Converter Kit (not specified) will be installed as a backbone component to support use of the S100. The S100's wireless base station will be interfaced to the yellow SeaTalk socket of the SeaTalk to SeaTalkng Converter using the SeaTalk to SeaTalkng Converter Cable supplied with the SeaTalk to SeaTalkng Converter Kit. Available cable lengths and the associated part numbers for these SeaTalkng networking cable and components may be found here.