Raymarine forum / Raymarine Forums / Multifunction Displays v / chart radar overlay

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
chart radar overlay
07-26-16, 08:19 PM
Post: #1
jim35 Offline
Junior Member
**
 		Posts: 18
Joined: May 2016
Reputation: 0
chart radar overlay
when I run the chart radar overlay on my e120 classic the radar range seems to be half of the chart range . Is this ok or is something set wrong? thanks , Jim
Find all posts by this user
Quote this message in a reply
07-27-16, 02:30 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: chart radar overlay
Welcome to the Raymarine Forum Jim,

You system is functioning correctly. The Chart application's range is specified to be the distance from the bottom of the Chart application page/pane to the top of the Chart application page/pane. Radar range is specified to be the range from the center of the Radar application page/pane to the top of the Radar application page/pane.
Find all posts by this user
Quote this message in a reply
07-27-16, 09:27 PM (This post was last modified: 07-28-16 08:28 AM by Chuck - Raymarine - Moderator.)
Post: #3
jim35 Offline
Junior Member
**
 		Posts: 18
Joined: May 2016
Reputation: 0
RE: chart radar overlay
I thought that was it but wanted to make sure . Thanks Chuck for the info , Jim
Find all posts by this user
Quote this message in a reply
07-28-16, 08:28 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: chart radar overlay
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication