Raymarine forum / Raymarine Forums / Multifunction Displays v / RD218, C70 and C80 multifunction displays

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RD218, C70 and C80 multifunction displays
03-03-16, 11:43 AM
Post: #1
sepvelasco Offline
Junior Member
**
 		Posts: 21
Joined: Feb 2016
Reputation: 0
RD218, C70 and C80 multifunction displays
Hello! it is possible to connect Radome Scanner RD218 in C70 and C80 multifunction displays at the same time ?
Thank you
Sergio
Find all posts by this user
Quote this message in a reply
03-03-16, 12:13 PM (This post was last modified: 03-03-16 12:15 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: RD218, C70 and C80 multifunction displays
Welcome to the Raymarine Forum sepvelasco,

Please click here to view a FAQ addressing this subject. As analog radar scanners cannot be interfaced to more than one MFD, it would be necessary to unplug the radar scanner from the Radar socket of one MFD and then plug it into the Radar socket of the other MFD to achieve the end which you are seeking.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication