Raymarine forum / Raymarine Forums / Fishfinders v / Transducer use with E7D

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Transducer use with E7D
03-06-16, 03:16 PM
Post: #1
mswanicke Offline
Junior Member
**
 		Posts: 34
Joined: Mar 2016
Reputation: 0
Transducer use with E7D
I would like to use my existing (1989 Airmar) transducer for depth and sound with my E7D plotter. Is there a way I can do this?
Find all posts by this user
Quote this message in a reply
03-07-16, 08:44 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Transducer use with E7D
Welcome to the Raymarine Technical Forum mswanicke,

Unfortunately should the transducer have been designed for a Raymarine fishfinder product which had been manufactured in 1989 or earlier, then the currently installed transducer may not be used with an ax7, cx7, e7D, ex7, eSx7 MFD, any currently manufactured or retired sounder module which may be interfaced an a/c/e/eS/gS-Series MFD. Please click here to view the transducers which are designed to be directly mated to the transducer socket of an ax7, cx7, e7D, ex7, eSx7 MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication