Raymarine forum / Raymarine Forums / Networking / System Integration v / AO6049 cable, AO6064 5 pin connector

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AO6049 cable, AO6064 5 pin connector
09-02-16, 12:59 PM
Post: #1
dond Offline
Junior Member
**
 		Posts: 12
Joined: Aug 2016
Reputation: 0
AO6049 cable, AO6064 5 pin connector
I am wiring the power cable that goes into the 5 pin connector.
Of the three wires one is an non-insulated wire. Is this sheathing or should it be attached to something?
Find all posts by this user
09-02-16, 01:41 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: AO6049 cable, AO6064 5 pin connector
Welcome to the Raymarine Forum dond,

The bare wire which you have identified is the cable's drain lead. Please click here to view a FAQ addressing what should be done with drain leads.
Find all posts by this user
09-02-16, 03:46 PM (This post was last modified: 09-06-16 03:12 PM by Mark - Raymarine - Moderator.)
Post: #3
dond Offline
Junior Member
**
 		Posts: 12
Joined: Aug 2016
Reputation: 0
RE: AO6049 cable, AO6064 5 pin connector
Thank you Chuck
Find all posts by this user
09-06-16, 03:14 PM
Post: #4
Mark - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 107
Joined: Feb 2016
Reputation: 1
RE: AO6049 cable, AO6064 5 pin connector
Your'e Welcome. Have a great day!
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication