European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
a78 Multi-Function Display
|
|
01-11-17, 08:47 PM
Post: #1
|
|||
|
|||
|
a78 Multi-Function Display
Hello, I bought Raymarine a78 Multi-Function Display. I have adapted the A80171 version of the P319 fishfinder transducer transducer to be interfaced to the DSM300. To connect a78 on the DSM300's SeaTalkHS socket do I need to buy some cable?
Thank you Sergio |
|||
|
|
01-12-17, 09:49 AM
Post: #2
|
|||
|
|||
|
RE: a78 Multi-Function Display
Welcome to the Raymarine Forum Sergio,
The DSM's SeaTalkhs socket may be mated to the Network socket of an a/c/e/eS/gS-Series MFD or HS5 RayNet Network Switch via and assembly constructed from an A80272 RayNet (M) to SeaTalkhs (M) Adapter and an appropriate length of RayNet (F) to RayNet (F) Cable. |
|||
|
|
|
01-12-17, 10:04 AM
(This post was last modified: 01-12-17 10:18 AM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
|
RE: a78 Multi-Function Display
it's not possible use SeaTalk 1 to SeaTalk ng Converter Kit? Because I have the cables ready in the cockpit. I would just remove the old C70
|
|||
|
|
|
01-12-17, 10:19 AM
Post: #4
|
|||
|
|||
|
RE: a78 Multi-Function Display
sepvelasco,
It is not possible to do as you have suggested. Please refer to my initial response addressing how these products must be interfaced to one another. |
|||
|
|
|
01-12-17, 10:44 AM
(This post was last modified: 01-12-17 11:49 AM by Chuck - Raymarine - Moderator.)
Post: #5
|
|||
|
|||
|
RE: a78 Multi-Function Display
Second option: I have P319 50/200 KHz - A80171 tansducer.
To connect directly to a78, what I need? |
|||
|
|
|
01-12-17, 11:48 AM
Post: #6
|
|||
|
|||
|
RE: a78 Multi-Function Display
Sergio,
It is not possible to interface a 50/200kHz fishfinder transducer to the TRANSDUCER socket of an ax8 MFD, eSx8 MFD, or CP100. |
|||
|
|
|
01-12-17, 12:02 PM
(This post was last modified: 01-12-17 01:24 PM by Chuck - Raymarine - Moderator.)
Post: #7
|
|||
|
|||
|
RE: a78 Multi-Function Display
RJ45 RAYNET IT IS AN OPTION TO CONNECT THE DSM300 TO a78 AND RAYNET HS CABLE? DO YOU HAVE RAYMARINE PRODUCT NUMBER FOR ME TO BUY?
|
|||
|
|
|
01-12-17, 01:41 PM
(This post was last modified: 01-12-17 01:41 PM by Chuck - Raymarine - Moderator.)
Post: #8
|
|||
|
|||
|
RE: a78 Multi-Function Display
Sergio,
It is not acceptable to simply insert a cable which has been terminated with a RJ45 (M) plug into a SeaTalkhs socket such as is found on a DSM30/300. Instead, a cable terminated with a SeaTalkhs plug (features a weatherproof locking ring with a RJ45 (M) plug inside of it must be used to mate/secure the communications cable to the product's SeaTalkhs socket. Should there be an issue with the cable having to be chased through a binnacle tube and it be desired to chase a RJ45 plug rather then a RayNet (F) plug, then it would indeed be permissible to use a cable assembly constructed from an A80247 RayNet (F) to RJ45 (F) Adapter and an appropriate length of SeaTalkhs (M) to RJ45 (M) Cable. |
|||
|
|
|
01-12-17, 09:38 PM
(This post was last modified: 01-13-17 09:46 AM by Chuck - Raymarine - Moderator.)
Post: #9
|
|||
|
|||
|
RE: a78 Multi-Function Display
IS it possible to have 2 TRANSDUCERS on the same boat? I could keep the old one on the DSM300 and buy another transducer for a78.
Thank you again |
|||
|
|
|
01-13-17, 09:48 AM
Post: #10
|
|||
|
|||
|
RE: a78 Multi-Function Display
Sergio,
It should indeed be possible to install and simultaneously operate fishfinders using both a CHIRP/DownVision transducer and a 50kHz/200kHz transducers. |
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)