Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Three New displays. Network assistance needed.
01-19-17, 07:47 AM
Post: #1
Three New displays. Network assistance needed.
To be sure that I have this correct . My New HD Digital 24 Inch Radome will connect to my new eS127 - both Power and Data goes through the radar cable.
Ray dome To the HS5 network switch which then connects to the display.
Just to verify :This arrangement will provide power AND data ? No need for separate power from a separate power source?
Find all posts by this user
Quote this message in a reply
01-19-17, 09:30 AM (This post was last modified: 01-19-17 09:31 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Three New displays. Network assistance needed.
Welcome to the Raymarine Forum dancenbear,

Please click here to view a FAQ addressing this subject. As indicated within the referenced FAQ, the Digital Radar Cable's power leads will need to be connected to a switched 12 or 24 VDC power circuit. Please click here to view a FAQ addressing installation of power circuits for Raymarine electronics.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)