Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Updating ST6000 Autopilot

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Updating ST6000 Autopilot
11-27-19, 11:48 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Updating ST6000 Autopilot
FARALLON,

The currently installed SeaTalk Cable will be unplugged from the autopilot control head and will instead be plugged into a D244 SeaTalk Junction Block. An A06047 / 15.7in (0.4m) SeaTalkng To SeaTalk Adapter Cable will then be used to connect the p70R Autopilot Control Head to the D244 SeaTalk Junction Block.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Updating ST6000 Autopilot - Chuck - Raymarine - Moderator - 11-27-19 11:48 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication