Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Axiom pilot control with Garmin GHC 10

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom pilot control with Garmin GHC 10
12-15-19, 07:20 PM (This post was last modified: 12-16-19 03:52 PM by Chuck - Raymarine - Moderator.)
Post: #1
GCM Offline
Junior Member
**
 		Posts: 1
Joined: Jun 2019
Reputation: 0
[CA11] Axiom pilot control with Garmin GHC 10
Hello,

Trying to integrate a new Axiom 9 with a existing Garmin pilot consisting of a GHC 10 control head and a ECU 12 brain...

Have connected new Axiom into existing nmea 2000 network but am unable to select pilot control through the settings page.

The Garmin system does not show in the network list but I believe it is connected correctly via stng and male devicenet cable.

Is the Garmin unit compatible?

What else if anything do I need to do to get it working?

Much appreciated,
GCM
Find all posts by this user
Quote this message in a reply
12-16-19, 04:09 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom pilot control with Garmin GHC 10
Welcome to the Raymarine Forum GCM,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication