[CA] [CA11] Sr100 to sr200

[Never II Nauti]

I am looking to upgrade from an sr100 to a SR200. Can I use the same antenna and plug from the sr100? Can use the same power plug from the sr100? I know I cannot use the interface cable which is Ethernet. Thanks

[Chuck - Raymarine - Moderator]

Welcome back to the Raymarine Forum Never II Nauti,

Q1. I am looking to upgrade from an sr100 to a SR200. Can I use the same antenna and plug from the sr100?
A1. The Sirius antenna and cable used with the SR100 may indeed be retained for use with a SR200. The SR200 includes an adapter to permit the currently installed cable to be connected to the SR200. For the benefit of others who may be viewing this thread, the SR200 is exclusively compatible with Raymarine's Axiom, Axiom Pro, and Axiom XL MFDs.

Q2. Can use the same power plug from the sr100?
A2. Negative. The power cable supplied with the SR200 must be installed and used to power the SR200.

Q3. I know I cannot use the interface cable which is Ethernet
A3. SeaTalkhs (M) Cables may be adapted to be interface to a RayNet Ethernet socket via an A80160 RayNet (F) to SThs (F) Socket Adaptor Cable.

[Never II Nauti]

Thanks again.

[Chuck - Raymarine - Moderator]

You're welcome.

[svgustovita]

I'm upgrading from an SR6 to the SR200. Can I use the SR6 Antenna with the SR200?

[Chris - Raymarine - Moderator]

Hello svgustovita,

Yes you can use the SR6 antenna with the SR200. There will be an adapter in the box with the SR200 that will adapt that cable style to the SR200.