[CA] [CA11] Rudder feedback

[Chuck - Raymarine - Moderator]

Bill,

It is recommended that you verify that the rudder reference transducer has been interfaced to the ACU in the manner specified by Octopus. If so, then verify that the autopilot's EV-1, ACU, and p70S have each been updated with the latest available Raymarine product software update and if not, update the software within these products accordingly. The currently installed software may be determined via the autopilot's diagnostics (MENU->SET-UP->DIAGNOSTICS->ABOUT SYSTEM). After doing so, it is recommended that a Pilot Factory Reset be performed and that the autopilot's Dockside Wizard be executed again. Should the problem persist, then it would be recommended that Support Team at Octopus be contacted to inform them that the rudder reference transducer is failing to pass the autopilot's dockside test (inconsistent values).