[CA] [CA11] Connecting St5000+ to Garmin 4210
|
01-07-20, 11:42 PM
(This post was last modified: 01-08-20 09:10 AM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
RE: [CA11] Connecting St5000+ to Garmin 4210
Chuck, Thanks for the quick reply. I will start the diagnostic process the next time I can run down to the boat. I have 2 questions: If I find that the Autopilot control unit is defective (assuming the pump is still good) what unit/package would you recommend to replace it on a Grady White 282 Sailfish. If I purchase the Seatalk 1 to SeaTalkng converter kit you mentioned what other connectors/cables will I need to tie into the existing Garmin 2k network. I am only asking because I only see 2 cables in the picture and one of them doesn’t have a connector on one of the ends. I am trying to visualize how and where this will tie into the Garmin 2k network. Thanks in advance, Jamie
|
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Connecting St5000+ to Garmin 4210 - Jamest123 - 01-06-20, 09:30 PM
RE: [CA11] Connecting St5000+ to Garmin 4210 - Chuck - Raymarine - Moderator - 01-07-20, 02:09 PM
RE: [CA11] Connecting St5000+ to Garmin 4210 - Jamest123 - 01-07-20 11:42 PM
RE: [CA11] Connecting St5000+ to Garmin 4210 - Chuck - Raymarine - Moderator - 01-08-20, 09:34 AM
|
User(s) browsing this thread: 1 Guest(s)