Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Heading Sensor Connect to R40XX Radar
01-08-20, 02:43 PM (This post was last modified: 01-08-20 03:54 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Heading Sensor Connect to R40XX Radar
My Raytheon R40XX Raster Scan radar is not receiving a signal from the Raymarine Heading Sensor. The NMEA connector is fitted to the Heading Sensor, but the signal is lost somewhere between the Sensor and the input to the Radar. To "remake" the cable, I need to splice a length of cable (with connector for the Radar) to the current cable connected to the Sensor.
I'm assuming Raymarine is no longer manufacturing such a cable.
Find all posts by this user
Quote this message in a reply
01-08-20, 03:57 PM
Post: #2
RE: [CA11] Heading Sensor Connect to R40XX Radar
Welcome to the Raymarine Forum seeray96,

Unfortunately, support for parts and service for these legacy radar system ended over a decade ago. Support for these radar systems is now limited to assisting customers locate the product manuals for these radar systems.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)