The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] RL70CRC+

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] RL70CRC+
01-11-20, 12:35 AM (This post was last modified: 01-13-20 02:12 PM by Chuck - Raymarine - Moderator.)
Post: #1
Heardsf Offline
Junior Member
**
 		Posts: 5
Joined: Apr 2017
Reputation: 0
[CA11] RL70CRC+
My RL70CRC+
Last summer, when I turned the chart plotter on it started to boot up then clicked off. I then left the power turned on to the chart plotter at the power panel for a few days. After that,when I turned the chart plotter on at the instrument, it then worked.
Is there an internal battery that needs to be replaced. If not, any other thoughts?

Thanks,

Stan
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] RL70CRC+ - Heardsf - 01-11-20 12:35 AM
RE: [CA11] RL70CRC+ - Heardsf - 01-25-20, 12:11 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication