[CA] [CA11] Depth transducer for 22 degree hull deadrise for i40 display

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum jorgemdn,

The i40/ST40 Depth/Bidata instruments, i50/ST60/ST60+ Depth/Tridata, and iTC-5 Analog Instrument Transducer Converter are all designed to be directly mated to an analog instrument depth transducer. Unfortunately, Raymarine does not offer an analog tilted element instrument depth transducer.. Typically, the centerline of the hull area immediately forward of the sailboat's fin keel will provide a flat surface (may be angle slightly upward toward the bow) where 0 degree instrument depth transducers may be installed (see Airmar's diagram below showing recommend sailboat installation location for depth transducers). Alternatively, an A26043 B744V or A26044 B744VL instrument transducer may be installed. The B744V's fairing block is designed to accommodate hulls having deadrise up to 24 degrees.