Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] T350
01-15-20, 08:29 AM (This post was last modified: 01-15-20 11:09 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] T350
Hi Guys, How are you?

A T350 thermal camera is compatible with Axiom XL series? In a system with 2 Axiom XL Can I share the imagem add a Axis connected on Switch HS5? Can I control the camera without a joystick? Just using the touchscreen.

Thank in advance.

Felipe Muniz
Find all posts by this user
Quote this message in a reply
01-15-20, 11:22 AM (This post was last modified: 01-15-20 11:23 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] T350
Welcome to the Raymarine Forum Felipe,

Q1. A T350 thermal camera is compatible with Axiom XL series?
A1. Yes. Raymarine's T-Series Thermal Cameras are compatible with Axiom/Axiom Pro/Axiom XL MFDs.

Q2. Can I share the imagem add a Axis connected on Switch HS5?
A2. Unlike prior generations of MFDs, Axiom Pro and Axiom XL MFDs will encode video received via their analog communications interface to permit the video from these cameras to be view on an of the system's MFDs. Similarly, the Raymarine T-Series Thermal Camera will be able to be controlled by any of the system's MFDs.

Q3. Can I control the camera without a joystick?
A3. Yes, the Raymarine T-Series Thermal Camera will be able to be controlled by any of the system's MFDs. Camera pointing may be accomplished via a RMK-10/9 or by dragging one's finger on the MFDs screen.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)