Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Block diagram Oregon fishing boat with Axiom

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Block diagram Oregon fishing boat with Axiom
01-24-20, 09:02 AM
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Block diagram Oregon fishing boat with Axiom
lukerabun,

The A102146 Paired CHIRP Transducer Y-Cable is designed to support connecting like transducers (ex. a B75M & B75H or B175L & B175M) to a 1kW CHIRP fish finding product (ex. Axiom Pro RV MFD, CP470, CP570). It is not possible to use the A102146 Paired CHIRP Transducer Y-Cable with two different types of CHIRP transducers (ex. B175HW & B75M). Should the B175HW & B75M both be installed on the vessel, then it would be necessary to interface the Axiom Pro RV MFD to another 1kW CHIRP fish finding product (Axiom Pro RV MFD, CP470, CP570). The second CHIRP transducers would then be interfaced to the additional 1kW CHIRP fish finding product. Please additionally not that the B75 CHIRP transducers must be mated to a Single Operation Cable (A80328) when not used in pairs of B75.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Block diagram Oregon fishing boat with Axiom - Chuck - Raymarine - Moderator - 01-24-20 09:02 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication