[CA] [CA11] Interfacing Axiom 9 to St40-bidata and tillerpilot
|
01-27-20, 12:24 PM
(This post was last modified: 01-27-20 12:47 PM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
RE: [CA11] Interfacing Axiom 9 to St40-bidata and tillerpilot
Hello Chuck,
My tiller pilot is a Raymarine ST1000+. The manual shows it connecting to a seatalk network using bare wire terminator with red (+12v dc), green (ground) and yellow (seatalk data). I have two questions here. First what is the part number of this cable (3M length) and second, does the st1000+ require a separate seatalk to seatalkng converter or can it be interfaced along with the ST40 bidata converter? There appears to be only one yellow connector on the seatalk converter. I would also like to know what cable one uses to connect two 5-way connectors when expanding s backbone? Thank you for your help. Frank |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Interfacing Axiom 9 to St40-bidata and tillerpilot - CaptnFrank - 01-20-20, 11:41 AM
RE: [CA11] Interfacing Axiom 9 to St40-bidata and tillerpilot - Chuck - Raymarine - Moderator - 01-22-20, 10:35 AM
RE: [CA11] Interfacing Axiom 9 to St40-bidata and tillerpilot - CaptnFrank - 01-27-20 12:24 PM
RE: [CA11] Interfacing Axiom 9 to St40-bidata and tillerpilot - Chuck - Raymarine - Moderator - 01-27-20, 01:02 PM
RE: [CA11] Interfacing Axiom 9 to St40-bidata and tillerpilot - CaptnFrank - 01-27-20, 04:25 PM
RE: [CA11] Interfacing Axiom 9 to St40-bidata and tillerpilot - Chuck - Raymarine - Moderator - 01-27-20, 04:43 PM
|
User(s) browsing this thread: 1 Guest(s)