The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] a95 boot and touchscreen issues
01-22-20, 12:22 PM (This post was last modified: 01-22-20 01:14 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] a95 boot and touchscreen issues
Experiencing seemingly random issues with a95 chart plotter:
1. sometimes on start up gets stuck on "acceptance" screen. Eventually it will get past the screen, not clear if acceptance "button" is working or not.
2. While chart or menu is displayed, screen will briefly freeze but recover within a minute or so.

Happens in dry environmental conditions, when it is hot or cold.

Have talked with RM support and researched issue on this board. Updated to LH 19.03, did a factory reset--no change in issues.

Will try a screen calibration, check stability of power.

Any other suggestions?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] a95 boot and touchscreen issues - wingman - 01-22-20 12:22 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)