[CA] [CA11] Axiom 9RV E70367-00-NAG question

[unixdood]

Hi,
Im looking at upgrading my current MFD to this new Axiom MFD. My current equipment is as follows:

E62220 E90w MFD
E63074 DSM30 Depth Finder
M78918 Airmar B66VL Transducer
E55058 Highspeed Network Switch box
E92142 RD418HD HD Digital 18" Radome

My question, Can I use the current radome and DSM with the new Axiom MFD?
Second question is can I use an analog camera input (composit) on the Axiom?

Thank you in advance
Bill

[Chuck - Raymarine - Moderator]

Welcome back to the Raymarine Forum unixdood,

Please refer to your other thread addressing use of the M78918 Airmar B66VL Transducer with a DSM30. Please click here to view a FAQ addressing replacement of an E-Series Widescreen MFD with an Axiom MFD. If operational, the switch, radome, and DSM may all be retained for use with the Axiom MFD. Regarding the DSM30, these sounder modules are officially not supported for use with Axiom/Axiom Pro/Axiom XL systems. Specifically, Axiom/Axiom Pro/Axiom XL MFDs and LightHouse 3 software have not been specifically designed for use with nor officially tested with DSMs. However, anecdotal feedback has indicated no issues thus far in using an operational DSM within systems featuring Axiom/Axiom Pro/Axiom XL MFDs. Accordingly, should your DSM30 be operational, then you might want to try it out with the new Axiom system. Should there be any sign of issue with the DSM30, then the DSM30 and its Power Cable should be replaced with a CP370 and its Power Cable.

[unixdood]

Thanks chuck for the quick reply

[Chuck - Raymarine - Moderator]

You're welcome.