Raymarine forum / Raymarine Forums / Multifunction Displays v / [LW] [LW11] ES97 Touchscreen problems with Lighthouse III

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] ES97 Touchscreen problems with Lighthouse III
02-03-20, 08:59 AM (This post was last modified: 02-03-20 10:35 AM by Louise - Raymarine - Moderator.)
Post: #1
Espen_Norway Offline
Junior Member
**
 		Posts: 1
Joined: Apr 2019
Reputation: 0
[LW11] ES97 Touchscreen problems with Lighthouse III
Hi

I have a es97. After upgraded to Lighthouse III i got problems with the touchscreen. It is not possible to use the touch-functions, need to use the buttons. Downgraded to Lighthouse II, then it works. Upgraded to Lighthouse III again, and still have the same problem.

Have tried restarts, reset, etc etc.

Config and diagnostics files attached.

Best regards, Espen
Find all posts by this user
Quote this message in a reply
02-06-20, 06:19 AM
Post: #2
Louise - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 867
Joined: Sep 2018
Reputation: 1
RE: [LW11] ES97 Touchscreen problems with Lighthouse III
Dear Espen_Norway,

Thank you for your post.

How many MFDs are there in the network? Do you have Axioms in the installation?

The eS97 should remain on Lighthouse 2 if it is not networked with the Axiom range, as the unit is designed to run this software revision.

What are the issues with the touch screen? What version of Lighthouse 3 are you upgrading with? Are you upgrading with a sd card populated with SW from the website?

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication