[TG] [TG11] RV100

[Ryan C2400]

(02-19-20 11:24 PM)Tom - Raymarine - Moderator Wrote:  Thanks Ryan. I'll look forward to seeing images in our 65/15/0 setup if the problem recurs. It does indeed look like an interference signal, but I don't recall seeing one quite like that before so I will be interested to follow this through to a conclusion. It would also be good to see some of the SV problems if you can capture those too.

Regards,
Tom

Good Morning Tom,

I popped out this morning to take some photos of transducer locations if that may also help with making sure I get the most out of my Axiom Pro.

I have the RV on the port side and the TM265LM on the starboard side. I placed the TM265 in exactly the same location as the previous P58 that I had running with my A127. That little transducer was great at keeping the bottom in depths up to 100m with out issue. That's why thought the 1kw in the same location would be a winner for sure. Also I have run both transducer cables in the same location as the old P58. They are all loosely zip tied together with all the other power cables for the winch, outboard out put lead and additional wiring.

I'm really looking forward to trying to get these two tranducers producing a near perfect (should say perfect) image with the RVX.

Kind Regards
Ryan