[DG] [DG11] Test of new ST60 Wind PCB
|
02-11-20, 02:04 PM
(This post was last modified: 02-11-20 04:00 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[DG11] Test of new ST60 Wind PCB
After replacement of the old PCB in in my ST60+ Wind Mast Head Unit(MHU), I wanted to test it before new season.
I do so as describe in this post: http://forum.raymarine.com/forumdisplay.php?fid=117 I powered it up separately with 8V and measured the Voltage of the yellow to black (Ground) wire. But it switches only from 0V to 2.5 V while slowly turning the anemometer. Will the instrument work with this or have I to reply to the seller? Thank you for answer Juergen |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[DG11] Test of new ST60 Wind PCB - earlinks - 02-11-20 02:04 PM
RE: [DG11] Test of new ST60 Wind PCB - Derek - Raymarine - Moderator - 02-14-20, 11:04 AM
RE: [DG11] Test of new ST60 Wind PCB - earlinks - 02-15-20, 05:14 AM
RE: [DG11] Test of new ST60 Wind PCB - Derek - Raymarine - Moderator - 02-17-20, 07:18 AM
|
User(s) browsing this thread: 1 Guest(s)