Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Type 1 auto pilot pump

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Type 1 auto pilot pump
02-22-20, 06:43 PM (This post was last modified: 02-24-20 08:45 AM by Chuck - Raymarine - Moderator.)
Post: #5
tonyiiiafl Offline
Member
***
 		Posts: 70
Joined: Mar 2016
Reputation: 0
RE: [CA11] Type 1 auto pilot pump
I just picked up my new Ray Type 1 pump. However, the connection points are not the same. On the original, they go “A” on left, “R” in middle and “B” on right. The new on is “B” on left, “R” in middle and “A” on right. Common sense tells me to just swap the connections to follow the new pump ports. SO, move A to the right port, and B to the left port. Make sense?


Attached File(s) Thumbnail(s)
       
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Type 1 auto pilot pump - tonyiiiafl - 02-22-20 06:43 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication