Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Upgraded autopilot. No dockside wizard.

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Upgraded autopilot. No dockside wizard.
02-25-20, 04:05 PM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Upgraded autopilot. No dockside wizard.
Bfb1115,

Per my initial post, please additionally perform the Pilot Factory Reset specified within my initial response. If updating the autopilot's software, perform the Pilot Factory Reset following the software update. The command sequence to access the Dockside Wizard is executed via the command sequence: MENU->SET-UP->AUTOPILOT CALIBRATION->COMMISSIONING->DOCKSIDE WIZARD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Upgraded autopilot. No dockside wizard. - Chuck - Raymarine - Moderator - 02-25-20 04:05 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication