[TG] [TG11] ST5000+. NO DATA error.
|
03-09-20, 01:29 AM
Post: #2
|
|||
|
|||
RE: [TG11] ST5000+. NO DATA error.
Hello davenz,
Do you know that what the NMEA mux is transmitting is exactly (character for character) what iSailor is sending? If so, it would be good to attach one of those NMEA logs. Some common problems with NMEA0183 data:
To really see what's happening, you would need to read what was coming into the ST5000+ with a PC and serial terminal (I use Teraterm on Windows or Moserial or Cutecom on Linux) and check the signalling with an oscilloscope. What the pilot needs to see will be at least bearing-to-waypoint, distance-to-waypoint and cross-track error (later pilots also need waypoint name.) These can come from any combination of the supported NMEA0183 messages which you will find in the ST5000+ handbook. RMB should provide all that's required as long as all fields are present and valid. Regards, Tom Raymarine since 1999. Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras Location: Sydney, Australia. Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[TG11] ST5000+. NO DATA error. - davenz - 03-02-20, 04:11 PM
RE: [TG11] ST5000+. NO DATA error. - Tom - Raymarine - Moderator - 03-09-20 01:29 AM
RE: [TG11] ST5000+. NO DATA error. - davenz - 04-08-20, 03:51 AM
RE: [TG11] ST5000+. NO DATA error. - Tom - Raymarine - Moderator - 04-13-20, 09:54 PM
RE: [TG11] ST5000+. NO DATA error. - davenz - 04-13-20, 11:02 PM
RE: [TG11] ST5000+. NO DATA error. - davenz - 05-02-20, 03:02 PM
RE: [TG11] ST5000+. NO DATA error. - Tom - Raymarine - Moderator - 05-04-20, 01:35 AM
RE: [TG11] ST5000+. NO DATA error. - davenz - 05-16-20, 03:08 AM
|
User(s) browsing this thread: 1 Guest(s)