Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] A Series A127 /128 NMEA 2000
03-15-20, 07:51 AM (This post was last modified: 03-16-20 04:00 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] A Series A127 /128 NMEA 2000
I have a couple of these in my boat and want to connect a NMEA 2000 Mercury / Cummins engine display module to them. Will it work?

SmartCraft Multi-Engine (1-4) NMEA 2000 Gateway
Find all posts by this user
Quote this message in a reply
03-18-20, 08:53 AM (This post was last modified: 03-31-20 07:24 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] A Series A127 /128 NMEA 2000
Welcome to the Raymarine Forum ocgrant,

Please click here to view a FAQ addressing this subject. Should
- your engines be compatible with the NMEA 2000 Mercury / Cummins engine display module, and should
- the engines be properly instanced (see the previously referenced FAQ), and should
- the NMEA 2000 Mercury / Cummins engine display module function as NMEA 2000 engine gateway (check the product's documentation or contact your Mercury Marine dealer), and should
- the NMEA 2000 Mercury / Cummins engine display module be interfaced as a spur to the system's powered and properly terminated SeaTalkng / NMEA 2000 backbone, and should
- the MFDs be updated / operating with the latest available Raymarine product software update,


then the MFDs should indeed be able to display engine data.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)