Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Compatibility E120 & Axiom
04-02-20, 02:34 PM (This post was last modified: 04-02-20 02:36 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Compatibility E120 & Axiom
Hi all. I have currently installed a 4kw 24 inch analogic radar radome and AIS (NMEA 0183) connected to a multifunction E120.
My question is: could I use a new Axiom multifunction as a slave screen of the E120? And, if so: do I need any additional device?
Thanks in advance
Find all posts by this user
Quote this message in a reply
04-02-20, 02:39 PM
Post: #2
RE: [CA11] Compatibility E120 & Axiom
Welcome to the Raymarine Forum BRIBOON'

Q. could I use a new Axiom multifunction as a slave screen of the E120?
A. Negative. The only type of MFD which may be networked to an E120 E-Series Classic MFDs to support the feature which you have described would be another E-Series Classic MFD (i.e. E80, E120).
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)