Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom pro/rv312
04-14-20, 08:25 AM (This post was last modified: 04-15-20 10:03 AM by Chuck - Raymarine - Moderator.)
Post: #4
RE: [CA11] Axiom pro/rv312
Jarmstrong,

Q1. not so easy for me to get it in 3 feet of water as I live inland
A1. Noted. I wouldn't expect the system to produce any meaningful plot or even plot a bottom if the vessel was out of the water or in water having a depth of less than 3' beneath the transducers.

Q2. but with the temp display on screen wouldn’t it show a temp out of water
A2. Indeed this is possible, but you will first need to configure the page to be overlayed with the Water Temperature data item per my initial response. After doing so, you should find that it is populated with data (i.e. not reported as -.-).

Q3. If I briefly enabled all sounders wouldn’t I be able to hear or feel the transducers pinging ?
A3. Unlike 600W, 1kW, or 2kW transducers, the power output from RealVision transducers, DownVision transducer, and CPT-S transducers is low enough that it may not typically be heard or felt by fingers placed on the face of the transducer.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Axiom pro/rv312 - Jarmstrong - 04-12-20, 10:00 AM
RE: [CA11] Axiom pro/rv312 - Jarmstrong - 04-13-20, 05:56 PM
RE: [CA11] Axiom pro/rv312 - Chuck - Raymarine - Moderator - 04-14-20 08:25 AM
RE: [CA11] Axiom pro/rv312 - Jarmstrong - 04-14-20, 09:47 AM
RE: [CA11] Axiom pro/rv312 - Jarmstrong - 04-14-20, 09:19 PM
RE: [CA11] Axiom pro/rv312 - Jarmstrong - 04-15-20, 05:50 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)