[DG11] Autopilot Drops into Standby and other issues

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[DG] [DG11] Autopilot Drops into Standby and other issues

04-23-20, 09:53 AM

Post: #6

randy@onlinecruisingguide.com Offline

Junior Member

Posts: 21
Joined: Jun 2017
Reputation: 0

RE: [DG11] Autopilot Drops into Standby and other issues

Hi Derek-
No indication of extra work or heat generated by the drive unit. So I guess we should suspect the course computer then. Dang.

I should have been more clear on the phantom waypoint. This is on the Autopilot ST 6001+ head unit only. I don't think anything at all shows up on the chartplotters. Never recall seeing any letter associated with the display, just "next waypoint?" which we typically just press auto to remove it.

« Next Oldest | Next Newest »

Messages In This Thread

[DG11] Autopilot Drops into Standby and other issues - randy@onlinecruisingguide.com - 04-18-20, 07:09 PM

RE: [DG11] Autopilot Drops into Standby and other issues - Derek - Raymarine - Moderator - 04-20-20, 08:48 AM

RE: [DG11] Autopilot Drops into Standby and other issues - randy@onlinecruisingguide.com - 04-20-20, 11:58 AM

RE: [DG11] Autopilot Drops into Standby and other issues - randy@onlinecruisingguide.com - 04-20-20, 11:59 AM

RE: [DG11] Autopilot Drops into Standby and other issues - Derek - Raymarine - Moderator - 04-23-20, 02:40 AM

RE: [DG11] Autopilot Drops into Standby and other issues - randy@onlinecruisingguide.com - 04-23-20 09:53 AM

RE: [DG11] Autopilot Drops into Standby and other issues - Derek - Raymarine - Moderator - 04-27-20, 07:00 AM

RE: [DG11] Autopilot Drops into Standby and other issues - randy@onlinecruisingguide.com - 04-28-20, 11:57 AM

RE: [DG11] Autopilot Drops into Standby and other issues - Derek - Raymarine - Moderator - 04-29-20, 05:40 AM

RE: [DG11] Autopilot Drops into Standby and other issues - AnOd - 05-01-20, 07:51 AM

RE: [DG11] Autopilot Drops into Standby and other issues - Derek - Raymarine - Moderator - 05-04-20, 07:24 AM

User(s) browsing this thread: 2 Guest(s)