Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Old Raytheon RAYDATA speed / depth display

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Old Raytheon RAYDATA speed / depth display
04-22-20, 12:20 PM (This post was last modified: 04-22-20 02:36 PM by Chuck - Raymarine - Moderator.)
Post: #1
BILL MC Offline
Junior Member
**
 		Posts: 12
Joined: Jun 2019
Reputation: 0
[CA11] Old Raytheon RAYDATA speed / depth display
RE: I have some 1997 vintage transducer equipment and wondering about the transducer wires currently going into the back of a Ratheon RAYDATA display for speed and depth.

Can I put these same vintage transducer wires into a Raymarine ITC-5 and connect to the network for my axiom MFD?
Thanks
Find all posts by this user
Quote this message in a reply
04-22-20, 02:36 PM (This post was last modified: 04-22-20 02:38 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Old Raytheon RAYDATA speed / depth display
Welcome to the Raymarine Forum Bill,

Q. Can I put these same vintage transducer wires into a Raymarine ITC-5 and connect to the network for my axiom MFD?
A. Yes. Axiom/Axiom Pro/Axiom XL MFDs operating with the latest available Raymarine product software updates will support calibration of analog instrument transducers which have been interfaced to an iTC-5.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication