[CA] [CA11] Axiom unit keep rebooting after inserting NC2 lighthouse chart card

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum cchildress44,

Please ensure that the MFD has been updated with LightHouse 3 v3.11.42 or later software. If so and the problem persists, then it would unfortunately appear that the data on the NC2 chart card has become corrupted. It is accordingly recommended that the NC2 chart card be sent to Raymarine’s Product Repair Center to be bench checked / replaced. Click on the Product Repair web page's Book a Repair link to initiate the process of booking a repair, which will in turned result in generation of a shipping label to then permit the NC2 chart card to be sent to Raymarine's Product Repair Center.