[CC11]mn30 Tacktick wireless wind

[Chris - Raymarine - Moderator]

Hello brooksnajr@yahoo.com and welcome to the Raymarine Forum.

You are not able to completely remove the MN30 from the system for a couple of reasons. A MN30 or wireless display is needed to power on the wireless side of the system. It is also needed for the auto-network procedure and any calibrations. you would be able to move the MN30 to a out of the way location assuming it still has good signal strength in the system.

There are a number of different packs including the microtalk puck at this link to support your upgrade, https://www.raymarine.com/instrument-dis...index.html