[CC11] ST8002 Cable Sheared

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CC11] ST8002 Cable Sheared

05-04-20, 10:57 AM (This post was last modified: 05-04-20 02:23 PM by Chris - Raymarine - Moderator.)

Post: #1

Brewster16 Offline

Junior Member

Posts: 3
Joined: Apr 2020
Reputation: 0

[CC11] ST8002 Cable Sheared

My autopilot has been working intermittently last season. It is now not working at all. It powers on and captures a heading in standby but if I touch "auto" it cannot not and will not assume control and I can still steer the boat even though the display reads "auto". Also turning the knob does nothing. I did some trouble shooting and went behind the head unit to find a cable which appears cut/corroded. I've attached pics....

« Next Oldest | Next Newest »

Messages In This Thread

[CC11] ST8002 Cable Sheared - Brewster16 - 05-04-20 10:57 AM

RE: [CC11] ST8002 Cable Sheared - Chris - Raymarine - Moderator - 05-11-20, 02:33 PM

RE: [CC11] ST8002 Cable Sheared - Brewster16 - 05-15-20, 05:14 AM

RE: [CC11] ST8002 Cable Sheared - Chris - Raymarine - Moderator - 05-18-20, 08:43 AM

User(s) browsing this thread: 1 Guest(s)