Raymarine forum / Raymarine Forums / Networking / System Integration v / [TG] STNG Converter to Axiom 9

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] STNG Converter to Axiom 9
05-04-20, 07:20 PM (This post was last modified: 05-07-20 10:12 PM by Tom - Raymarine - Moderator.)
Post: #1
[email protected] Offline
Junior Member
**
 		Posts: 3
Joined: Apr 2020
Reputation: 0
STNG Converter to Axiom 9
Chuck---On the STNG converter, yellow connects to my 0183 VHF, one connection to power the backbone and one sput cable to the Axiom. Is there another adapter to connect the white spur cable to the Axiom MFD.

Thank you,
Find all posts by this user
Quote this message in a reply
05-07-20, 10:13 PM
Post: #2
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: [TG] STNG Converter to Axiom 9
Hello Robert,

Yes. The Axiom uses a Devicenet connector, so you need a Devicenet - STNG adaptor, part number A06075.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication