Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Axiom 12 Shows Grossly Incorrect date
05-13-20, 02:12 AM
Post: #2
RE: [TG11] Axiom 12 Shows Grossly Incorrect date
Hello Ronj31,

Can you send us a recording of your NMEA2000 data taken when everything (including the engines) is up and running and the problem is apparent? A couple of minutes of data would be good, but whilst making the recording please press Refresh on the 'NMEA Devices and messages' page so that we can see in the log the response to that poll (device information.) Please post the NMEA2000 recording back here as an attachment.
I would like to see what devices are transmitting what date/time. That sounds like either the date information is being overridden by something else, or what we call a Data Loop. This is a standard Axiom or an Axiom Pro?

Thanks,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] Axiom 12 Shows Grossly Incorrect date - Tom - Raymarine - Moderator - 05-13-20 02:12 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)