Raymarine forum / Raymarine Forums / Networking / System Integration v / Axiom 9 Pro integration question

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom 9 Pro integration question
05-21-20, 11:20 AM
Post: #3
ktyminski Offline
Junior Member
**
 		Posts: 3
Joined: May 2020
Reputation: 0
RE: Axiom 9 Pro integration question
Chris, I may not have provided all the necessary information and need clarification on your reply.

The Course Computer attached to the ST6001 is a model 100. Based on everything I read this needs to connect to the Axiom 9 PRO RVX over NEMA0183. Is that correct or can I use Seatalk?

The adapter you referenced to connect up the B256 Transducer from the DSM250 to the Axiom is an 8 pin adapter. The plug on the B256 is a 7 PIN. Am I missing something?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Axiom 9 Pro integration question - ktyminski - 05-21-20 11:20 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication