Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
i60 giving wrong wind direction and spead
05-18-20, 08:35 AM
Post: #1
i60 giving wrong wind direction and spead
Hi raymarine, I recently have replaced my ST60 wind display with an i60 to match the look of other instruments. I have not changed the wind vane. the i60 is directly connected to the vane . SeaTalk is also connected for power and linked into backbone connected to chart plotter.

the wind is about 90ยบ off where it should be but this seems to vary. The wind speed is about half what it should be. I have attached a video and some photos.

I have reset the device factory defaults as per the manual. I have checked wind speed whilst on the mooring against wind speed on the club weather station. the i60 gave 10knots whilst the club 18. see photos.

The ST60 was previously very acurate on direction and speed.. not sure what to do.

Thanks


Attached File(s) Thumbnail(s)
               
Find all posts by this user
Quote this message in a reply
05-20-20, 02:52 PM
Post: #2
RE: i60 giving wrong wind direction and spead
Hello adamcovell,

I would recommend going though the calibration procedure in the attached manual on page 38.

Chris,


Attached File(s)
.pdf  i60 Installation and operation instructions 81342-4-EN.pdf (Size: 3.24 MB / Downloads: 6)
Find all posts by this user
Quote this message in a reply
06-01-20, 11:31 AM
Post: #3
RE: i60 giving wrong wind direction and spead
Thank you I will do that
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)