Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] Replacing T120 masthead transducer
05-19-20, 03:43 AM (This post was last modified: 05-20-20 11:10 PM by Tom - Raymarine - Moderator.)
Post: #1
[TG11] Replacing T120 masthead transducer
I need to replace my T120, which lost its cups due to bird damage. How do I get the system to pair with the new unit? The old unit is still at the top of the mast, and the new unit in the cabin awaiting pairing.
Find all posts by this user
Quote this message in a reply
05-20-20, 11:12 PM
Post: #2
RE: [TG11] Replacing T120 masthead transducer
Hello Pamperopyc,

Complete the Auto-Networking procedure, with the new Wind Transmitter at deck level. You do the Auto-network from your existing display, with it and the new Wind Transmitter within 30cm of each other. Only take the new Wind Transmitter up the mast when you're sure it's working with the display(s).

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)