Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] 3.11.42 update and no heading error
06-15-20, 04:10 PM
Post: #9
RE: [TG11] 3.11.42 update and no heading error
Hi Tom,
I finally got back to the boat and checked. A little background; on my original installation the installer connected my ST8002 auto pilot via a NMEA0183 connection and it worked fine. i thought I could utilize the functionality of the pilot screens by configuring a SeaTalk STNG Converter and so changed to that connection, and subsequently found out that I could not utilize the pilot screens.

So to answer your question. When I checked the heading data source the 183 connection was checked, i manually changed it to the Converter source. I am still getting the "no heading alarm", however, i do have a valid heading.

This issue presented after the software update. Should I do a factory reset?

thanks.

Mike
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] 3.11.42 update and no heading error - Glorydays - 06-15-20 04:10 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)